M.E.K. (Methyl Ethyl Ketone)

Klean-Strip 100% pure Methyl Ethyl Ketone is a thinner and remover for specified coatings, including polyester and epoxy resins, ink, adhesives and contact cement. It is recommended for use when a rate of evaporation slower than acetone is desired.

Product Number / Size

QME71 - Quart
GME71 - Gallon
CME71 - 5 Gallon

 

Directions for use

Follow the coating manufacturer’s instructions for the proper amount of M.E.K. required; do not use more than recommended.

IMPORTANT:
Carefully read all directions, notes and cautions prior to use. Only use this product as directed on the label. Do not use as a fuel. Do not use for any other purpose. Do not spread this product over large surface areas because fire and health safety risks will increase dramatically. Protect eyes with chemical splash goggles and avoid prolonged skin contact.

HELPFUL TIPS:
Use only as specified by the coating, adhesive or hobby product manufacturer. Do not use as a general purpose cleaner. M.E.K. may soften or damage plastics, synthetics and many other finishes. Use only where specified, and test an inconspicuous area before application.

The “Directions for Use” are included to help you better understand our product. However, they do not provide you with all of the information needed to use the product safely and effectively. Prior to using any of our products, you should always read the entire label including all cautions. A copy of the current label is linked to this webpage.

 

 

 

© Copyright 2007 W.M. Barr & Co., Memphis TN | P.O. Box 1879 Memphis, TN 38103 | 1-800-238-2672