View CPSIA Certificate
View Regulatory Data Sheet
Safe for use on antiques and fine furniture to refinish without harming the wood or damaging glue joints and veneers. It dissolves most clear finishes such as varnish, lacquer, polyurethane and shellac from all types of wood in 30 minutes or less. The thin liquid formula goes on quickly and evenly to get into grooves and crevices.
Product Number / Size
QKK5.1 - Quart
Directions for use
1. Wear chemical-resistant gloves and chemical splash goggles. Shake well and open can slowly to relieve pressure. 2. Pour into a metal container. Dip a stripping pad or brush in Klean Kutter and apply to a small area (up to 9 sq ft). Rub gently with a circular motion until the old finish has dissolved and can be wiped away with paper towels or clean rags. 3. Rinse stripping pad in fresh Klean Kutter and repeat steps until desired amount of old finish has been removed. A toothbrush, toothpick or stripping brush will help remove old finish buried in recesses. 4. Surface should be completely clean and dry before refinishing.HELPFUL TIPS: Do not use for stripping floors or any place where a flammable remover might be hazardous. Do not mix with any other product. For best results, use in temperatures between 65°F and 85°F and away from strong breeze and hot sun. Protect surrounding areas with a heavy plastic drop cloth. Do not use on linoleum, plastic, rubber, asphalt tile,fiberglass or other synthetics. Use over a small area because health and safety risks will increase dramatically when used over large areas. If applying to a vertical surface, begin at the bottom and work up because vapors can accumulate near the floor.
© Copyright 2007 W.M. Barr & Co., Memphis TN | P.O. Box 1879 Memphis, TN 38103 | 1-800-238-2672