Graffiti Remover (Discontinued)

Klean-Strip Graffiti Remover is a biodegradable, non-caustic formula that removes multiple layers of graffiti from unpainted surfaces, such as glass, metal, masonry, concrete, and wood.  This fast-acting formula clings to vertical surfaces and works without scrubbing.

Click here to see a video of Graffiti Remover being used on a building facade.


Product Number / Size


EKGR16698 - 18 oz. Aerosol

 

Directions for use

DIRECTIONS FOR USE:

1. Wear chemical-resistant gloves and chemical splash goggles. Be observant of torn gloves or other accidental skin contact since no burning or stinging sensation is immediately experienced.

2.  Shake well. Hold the can upright and approximately 10” from the surface.  Point the arrow on the spray button away from you. Using a back and forth motion, apply a generous coat over the graffiti.

3. Leave the area and allow 15 – 30 minutes for the remover to penetrate and loosen the graffiti. If applying to a vertical surface, begin at the bottom to prevent breathing vapors which accumulate near the ground.

4. Use a non-metallic scraper or stripping brush to lift off loosened graffiti. Residue can be removed with a coarse rag dipped in warm soapy water.

5. If some graffiti shadows remain, a second application may be needed.

IMPORTANT: Carefully read all cautions and directions before use.

HELPFUL TIPS: For outdoor applications, use in temperatures between 65°F and 85°F and away from strong breezes and direct sunlight. This product may not be compatible with all surfaces and all conditions surrounding application. Before applying to any surface, always test product in a small, inconspicuous area to ensure no damage will result. Be careful of runs, drips and overspray and keep in mind that the treated area will look cleaner than the surrounding areas. If a second application does not remove shadows and stains, a high-pressure water sprayer may be needed.

DISPOSAL: Dispose of in accordance with local, state and federal regulations.

The “Directions for Use” are included to help you better understand our product. However, they do not provide you with all of the information needed to use the product safely and effectively. Prior to using any of our products, you should always read the entire label including all cautions. A copy of the current label is linked to this webpage.

The “Directions for Use” are included to help you better understand our product. However, they do not provide you with all of the information needed to use the product safely and effectively. Prior to using any of our products, you should always read the entire label including all cautions. A copy of the current label is linked to this webpage.

 

 

 

© Copyright 2007 W.M. Barr & Co., Memphis TN | P.O. Box 1879 Memphis, TN 38103 | 1-800-238-2672

Klean-Strip